Side-Mount System

OMS

^®

Equipment for
Underwater Exploration^™

Главная страница

Каталог

Инструкции

PDF каталог

Контакты

Снаряжение OMS

OMS ^® BC / Back Plate Harness Systems
Back Plate / Harness Specification Sheet Proper Stringing of Quick release buckle

Back plates: OMS's superior deburring process eliminates back plate sharp edges, and prevents abrasion and cuts to webbing and BC’s. The Aluminum Back plate weighs 1.75 lbs., the Stainless 5.75 lbs and both include the following slots: 1” and 2” width Crotch Strap, (2) Cam Band, and a bottom slot to accommodate band bolts that are slightly off 11” On Center. Stainless Steel plate is passivated to prevent oxidation and the Aluminum plate is Hard Coat Anodized.

Harness Systems: OMS ^® now offers 5 innovative harness systems that can be coupled with the Aluminum or Stainless Steel back plates. Perhaps the newest and most innovative development is that the Comfort Harness Systems I™ and II™ along with the IQ Pack™ now incorporate a pull dump tunnel on each shoulder pad. See figures 6 and 7

How Buoyancy Systems Work
click for a larger image

Complete Aluminum or Stainless Steel Backplate / Harness Systems:

One piece Hogarthian System (BP-166) Fig.2
Harness with single shoulder release (BP-123 / 120) Fig 3.
Comfort Harness System™ (BP-133) with 2 chest mounted D-Rings Fig. 4 & 5
Comfort Harness System II™ (BP134) with adjustable Oblique webbing and 4 chest mounted D-Rings
(Fig. 7, 8 & 9)
IQ Pack™ (IQ) Fig 6
Hazmat Public Safety Diving harness (IQ C)

Many of the harness's can be customized with the following options: cumberbund, shoulder pads, backpad and Emergency Deployment System™. All systems are supplied as pictured (unless otherwise noted).

OMS webbing

Fig. #1		Fig. #2 Continuous Weave Harness Setup		Fig. #3 Deluxe Harness Setup w / shoulder release

Item #	Description	Item #	Description	Item #	Description
BP020	Aluminum Back Plate (1.75lb)	BP-166	One Piece Harness System (Harness sold separately from back plate)	BP-123-S	S / S Back plate Harness System with single shoulder release
BP015	Stainless Back Plate (5.75 lb) (pictured)			BP-120-S	Aluminum Back plate Harness System with single shoulder release


Fig. #4 Comfort Harness Setup		Fig. #5		Fig. #6

Item #	Description	Item #	Description	Item #	Description
BP-133-S Comfort Harness System™ standard with shoulder pads		BP-133-S Comfort Harness System™ shown with optional Cummerbund (BCA-CBD2) and optional Back pad (BCA-BPP)		IQ™ IQ Pack™ shown without optional pockets IQ Size chart below

Cummberbund Installation Manual

Fig. #7

Fig. #9

IQ Size Chart

Size	Waist	Height	Weight	Chest
XS-S	32" to 46"	5'2" to 5'9"	150 lbs to 185 lbs	36" to 40"
M-L	34" to 48"	5'9" to 6'4"	185 lbs to 240 lbs	40" to 50"
L-XL	40" to 54"	6'4" to 7'0"	220 lbs to 300 lbs	48" to 60"
Chest: Measure around the fullest part of the chest, just under the arm and across your shoulder blades. Waist: Measure around your waist, over a shirt (but not slacks), at the height you normally wear your belt
Divers should take into consideration the extra girth added by dry suits and dry suit underwear when taking measurements.

BP-134 Comfort Harness System II™ with adjustable Oblique webbing, (4) Chest Mounted D-Rings, and a pull dump tunnel on each shoulder pad.

Available with Aluminum (BP134-A) or Stainless Steel (BP134-S) back plate.

Sizes : Harness available in Small/Medium, Large and XLarge

BP-134 Comfort Harness System II™ with adjustable Oblique webbing

shown with Optional
Back pad (BCA-BPP-K) and
Cummerbund (BCA-CBD2).

BP-134 side view showing Oblique strap adjustability

OMS ^® PROFILE™ SIDE-MOUNT SYSTEM Side-Mount System Setup
This system has filled a void and will offer the “at home” and traveling diver freedom from the weight concerns of handling “back mounted” doubles. Side-mount allows individuals with limited physical abilities and lower back issues to enjoy the redundancy of two tanks and two regulators by minimizing the amount of weight on the lower back and lowering the center of gravity for increased stability when entering/exiting the water. Additionally reaching behind your head to shut off or turn on your manifold valve is a thing of the past as both cylinder valves are near your hands. Traveling divers can relax knowing that easily available single tanks are all they need to enjoy redundancy and adequacy of gas supply for any dive around the world.	BP-SMS
Features: Allows the diver to utilize most harness and wing systems (with standardized 11 inch O.C. hole spacing) Over the shoulder design keeps the wing close to the divers back and allows air to travel freely from divers left to right Integral bib adds over 1/8” inch of abrasion protection to the vulnerable top part of the wing No changes to the fit of the harness throughout the inflation of the wing from empty to full capacity Permits the Rebreather diver to back mount the CCR scrubber and side mount the Oxygen and Diluent cylinders Enables the diver to back mount the bottom gas and side mount the decompression gases Streamlines the diver allowing access to tight, remote, hard to reach caves and wreck passage ways

Item #
BP-SMS

Description
Profile™ Side-mount system
(shown with optional Tesseract™ BC)

Версия для печати

Questions or Information on OMS products

Specifications subject to change without notice Not responsible for typographical errors

Corporate Information Comments about this site ?